Continuing analysis of the depth of penetration applied via machine model 14. After numerous sessions with the subject, the optimal angle and motion have been confirmed and inputted into the database.
Test Subject 0057 has had to be restrained in a more secure manner than previously to prevent any further thrusting motions, as she has continuously attempted to sway her hips in order to gain deeper penetration.
This analysis of the control of the penetrative machine has shown that the device had not been correctly calibrated; some of the thrusts were giving a less accurate penetration. After many tests with the subject, this has been corrected, with the machine constantly penetrating just below the threshold, which would typically cause for full sexual fulfilment: precisely a 1-inch penetration has been consistently recorded so far. Even when the speed is increased to a maximum, the depth of penetration now remains unchanged, keeping to a 1-inch penetration while causing for a rapid speed which simulates a vibration.
Previous tests with the subject had caused for her to call for mercy after 20 minutes. She had been instructed to abstain from this until the need for more sexual penetration was unbearable. With the machine now properly adjusted to apply an accurate, consistent penetration, the subject has begun begging after 12 minutes and 17 seconds. I shall, however, keep the observation continuing for another 30 minutes to make absolutely sure that the collaboration remains consistent.
Test subject 0057 continues to beg repeatedly for a deeper penetration which will not be granted.
Content created by: PleasureTorture
Image source from: Kink